To the Pinko, Jack-booted Gun-Grabbers: You win. Guns80 is closing. August 23, at 3pm EST we will NO LONGER sell 80% Kits. You have violated our right to due process, creating legislation outside your authority with minimal consideration for the overwhelming negative response you received. I hope that when the need for a well regulated militia comes, there is enough left to support you.
To all of our customers, fans, followers and fellow second amendment supporters: Keep fighting the good fight. We tried to keep the fight going, and did for almost a decade. Grab what you can before it is gone. Don't let the leftists win. Thank you so much for all of your support over the years.
This Product is ready to ship.
Hybrid 80% AR-15 Lower Cosmetic Blem and Jig. Once your rifle is finish you wont see the blem.What can we say about the new Hybrid-80 Liberator. This is THE TOUGHEST polymer 80% lower we have ever seen. They sent us a sample and we beat it, ran it over with a car, and it survived! They took the standard AR-15 lower, kicked it up with glass-filled nylon, and inserted brass rings in the buffer tower and pistol grip screw.The kit includes:
80% Polymer AR15 Lower Cosmetic BlemReceiver Polymer JigTrigger Hole Drill Guide
They have a small hole in the mag well but it doesn't effect functionality. Look at pictures for example.
Welcome to our store. We are constantly expanding our product lines. Please check back frequently. Guns80 was founded in 2014 to bring affordable 80% lowers to the market.
What is an 80% Lower?
An 80% lower is the unfinished frame of a firearm. It is the last point before the goverment considers it a firearm. The 80% lower is NOT considered a firearm.
Is an 80 percent lower legal?
You are building and finishing the weapon yourself for yourself. This makes it legal under the Gun Control Act of 1968. This is on the ATF’s website https://www.atf.gov/questions-and-answers/firearms-qas Make sure to do your own research with federal, state, and local laws before purchasing.
Can I Build an 80% Lower as a gift to my friends or family?
No, if you build one it has to be for yourself. You must be a licensed manufacturer to build the firearm for someone else.
If I purchase an 80% kit will I need more parts to finish my firearm?
No you will not need to purchase more parts but certain tools can make the process easier.
Do I need to put serial numbers on the finished 80% lower?
A licensed Manufacturer has to seriallize all firearms they make. You making a personal one is not required but you may want to put markings so it can be distinguished if it is ever stolen.
What can Law Enforcement do if they see me using my completed firearm?
As long as you are using it legally, nothing. IF they are like our local law enforcement they are gun people as well and might want you to talk about it. But if I had to guess, it would be more curiosity than anything else.
Can I make an SBR / Full Auto / other weapon?
If I am not allowed to purchase a firearm through traditional means can I own an 80%?
NO. To make your own firearm you must be legally allowed to own and purchase a firearm.
Do You Ship to New Jersey or California?
Not anymore. Don't like it? fire your governor.
How to finish a receiver.
What tools work best for finishing a receiver?
We suggest that you have a drill press and a x y table with a vice to finish the lowers. There are some that say it can be done with a rotary tool, but it is not suggested. You can also use a milling machine, or rent time at a local machine shop. You may also want to have a few files to clean up the lower when you are finished.
What size drill bits and milling bit are suggested for finishing the AR-15 lower?
5/16" End Mill (For milling out fire control pocket) 5/16" Drill Bit (Trigger hole) 3/8" Drill Bit (Saftey selector switch) 5/32" Drill Bit (Trigger pin and Hammer pin)
Hybrid 80 Instructions
They say it a first draft but a lot of good information.
Aluminum AR-15 80% Lower
Video AR-15 80% Lower Finishing Part II (4:51)
This is another great educational video. This has good tips on how to complete an aluminum 80% lower.
How to Build an AR-15 Lower Receiver
Video How to Build an AR-15 Lower Receiver (19:01)
How to put together your lower receiver. Just like a gunsmith. With lots of tools.
How to Build an AR-15 Upper Receiver
Video How to Build an AR-15 Upper Receiver (28:55)
How to put together your upper receiver. With a little help from Midway. Not trying to sell tools or anything....
Ar-15 BCG Breakdown and assembly
Video How to Breakdown and assembly your BCG (2:05)
All the basic info you need about your BCG